0 items / $0.00

DUO Black Steel Anchor Stand (holds 2 Onewheels)

$89.99 Sold out

Image of DUO Black Steel Anchor Stand (holds 2 Onewheels)

Inspired by the rugged elegance that epitomizes Onewheel, the DUO Black Powder-Coated Anchor Stand holds 2 Onewheels of any configuration solidly in place. Industrial yet minimalist in design, the DUO is a fitting companion for your Onewheels. Created by an enthusiastic Onewheel rider, the DUO accommodates the Onewheel, Onewheel+ And Onewheel+ XR, including boards with Float Plates and/or the Craft & Ride Tail- it holds them all! Fabricated from a single piece of hot rolled steel, there are no welds, no separate pieces. It's wide enough (22 inches) to accommodate 2 boards with a 3.25-inch gap in-between, allowing you to charge both boards at the same time (some other double stands don't leave a gap, so there's no way to plug the Ultra Charger cable into the board on the left). You can also place just 1 Onewheel in the stand- it won't tip.

Using the DUO is simple, fast and easy- set the OW tail down behind the front lip of the stand and lean it back until it rests on the rear lip. Repeat with the other board, leaving a gap in-between. The weight of the boards creates pressure on the stand, locking them in place. To remove the boards, lean them forward and lift out. Both OW Ultrachargers fit perfectly on the base plate or on the top shelf behind the boards, and a 2-inch hole centered on the back side allows for cable management.

Weighing in at over 13 pounds, the DUO is substantial in weight and effortlessly holds 1 or 2 Onewheels. The footprint is minimal: 22" W x 9" D x 6.125" H. It's everything you want in a Onewheel stand, and nothing you don't.

What's in the box:
- 1 DUO Black Steel Anchor Stand (holds 2 Onewheels)
- 6 rubber feet to adhere to the underside (protects flooring and provides grip)

From the time your order is received, allow 7-10 days to receive your product. Currently we ship within the U.S. For international orders, via the 'Contact' link please send your full shipping address and we'll be in touch with a quote (for the retail price of the stand plus shipping at cost).

NOTE: if using the stand on carpet it will be necessary to support the rear edge so it doesn't tip while holding your OW. We recommend picking up 5/8" Anti-Dent Carpet Protectors such as these from Amazon: www.amazon.com/SoftTouch-Stick-Anti-Dent-Carpet-Protectors/dp/B00DCX3BO4/ref=cm_cr_arp_d_product_top?ie=UTF8&th=1